3 Steps for Using a Drain Snake

7/1/2022 (Permalink)

How To Use A Drain Snake In 3 Easy Steps

If it looks like a snake, moves like a snake, and is made out of metal, you're probably not sure what it is or what to do with it. This tool is called an auger. Most people call it a drain snake and use it to remove debris from clogged pipes. The next time your plunger just isn't doing the job, follow these tips to properly use a snake without creating a disaster that requires a water remediation company.

1. Acquire the Snake

The first thing you need to do to clear your clogged drain is to acquire a snake. There are both old school and electric models available. You can find them at any hardware store in Kings Point, FL. While a good one may cost a few dollars, think of all the money you're going to save by not having to call a plumber every time your pipes won't drain. If you still don't want to buy one, larger home-improvement stores often offer them as rentals.

2. Prepare the Area

Start by putting on some gloves and having a bucket nearby. These will be handy for when you pull a glob of something out of your drain. You may also want a towel to set the auger on after the process. Once you have prepared the area, get the snake and get ready to work.

3. Insert the Snake

Start by inserting the snake into your clogged drain and giving it a few hard cranks to get the tip around the trap. Keep pushing until you reach the blockage. At this point, you will rotate the head. Often, you will know it is time to rotate the head because you will feel resistance, or your auger will not want to turn. Although it is tempting to get rough, you must continue to be gentle as you pull the clog out to avoid a pipe break or other situation.

A stopped drain is a pain. Fortunately, you can follow these steps to get it clear in no time.